An impact, UV and weather-resistant digital motion detector module suitable for outdoor use.

$168  

The NV35M series provides a superior outdoor and indoor solution for window and sliding door protection, with two operation modes: Pet Immune Mode 7.5 x 2m (25 x 7 ft) and Sharp Mode (indoor use) 10 x 2m (33 x 7 ft) with dual verification detection.

$104  

The NV35M series provides a superior outdoor and indoor solution for window and sliding door protection, with two operation modes: Pet Immune Mode 7.5 x 2m (25 x 7 ft) and Sharp Mode (indoor use) 10 x 2m (33 x 7 ft) with dual verification detection.

$133  

The Direct Connect Interface (307USB) allows for direct on-site communication between a computer and a control panel. It can also be used to upgrade your control panel’s firmware.

$116  

Compatible with MG5050 and Spectra SP series V2.31 and up.
Displays the status of 32 zones in 2 partitions.
StayD status icon.
Displays Arm, Sleep, Stay and Disarmed status for each partition.
Adjustable backlight.
1 keypad zone input.

$149  

The ZX8SP is an 8-zone expansion module designed for the Magellan and Spectra series control panels. The ZX8SP connects to the control panel's combus to provide eight additional hardwired inputs and one 50mA on-board PGM output.

N.B. The ZX8SP does not support ATZ or fire zone connections.

$67  

Paradox Wireless Glass break Detector

$275  

The Paradox PRT3 Integration Module is a printer module that allows you to automatically print live and stored events. It provides an interface between an EVO control panel and third party peripheral systems as well as including a USB port for direct PC connections. The PRT3 is also able to be upgraded in the field using the CV4USB converter kit.

$197  

The Paradox PS25 is a 2.8A supervised switch mode power supply that connects to a Paradox control panel bus or may work as a standalone power supply.

$141  

$28  

Compatible with E55/E65 (V2.00), MG/SP (V3.00) and EVO.
4 fully programmable 5A relay outputs.
Deactivate PGM after event and/or timer.
Pulse PGM output for fire alarms.
In-field firmware upgradeable.

$121  

The Paradox PCS260A 3G data-only (no voice) communicator enables Paradox alarm panels to send messages to a Base Station Control Room without the need for a PSTN telephone line. The PCS260 delivers communication via GSM to any Base Station that receives Contact ID or via GPRS to Paradox IP Base Station receivers.

$564