Aetek 4 Port Managed POE Bt Switch, for C62-05030x Switches 2x1G, 360W AET-C62-044-91-380

Roll over image to zoom in

Aetek 4 Port Managed POE Bt Switch, for C62-05030x Switches 2x1G, 360W

SKU: AET-C62-044-91-380


About this item

Layer 2 Switch
802.1d (STP), 802.1w (RSTP), 802.1s (MSTP)
Loop protection
SNMP v1/v2c/v3
QoS
VLAN
Ethernet cable length measurement
DHCP Server
Network Topology System
Automatic discovery for ONVIF camera
Generates camera topology map automatically
Cable diagnostic & reboot camera remotely
PoE management
Topology view / Floor view / Google map
Monitor / Configure / Manage ONVIF camera thru web
Flexible SFP transceiver ports for uplink
Supports 10/100/1000Mbps data rates
Support Auto-MDI/MDIX
Built-in 6KV surge protection for each PoE port
IEEE 802.3az Energy Efficient Ethernet standard for green power
19" Rackmount installation

Details

The C62 series from AETEK offers a broad range of NTS L2 PRO Managed PoE Switches, equipped with multi-port Gigabit PoE (10M/100M/1G) and SFP transceiver (100M/1G) slots for flexible link. The C62 series has two sub-models including 4 ports and 8 ports complying with IEEE 802.3bt/at/af standards with sufficient PoE power budget for any application.
Besides a NTS L2 PRO Managed PoE switch, C62 series is also an IP camera controller specially designed for easy overview & management of IP cameras complying with ONVIF, even if installers is not familiar with advanced software of NTS L2 PRO Managed PoE switch. A centralized Web GUI (Graphic User Interface) makes it easy to find cameras and generate topology automatically once ONVIF IP cameras are connected to C62 series. Meanwhile, installers can easily catch comprehensive individual camera information including camera list, IP/MAC address, topology, power consumption, and traffic monitoring thru web browser.

The AET-C62-04491380 is equipped with multi-port Gigabit PoE (10M/100M/1G) and SFP transceiver (100M/1G) slots for flexible links. 90W POE bt ports provide power for high powered POE bt PTZ and specialised cameras and is required for Aetek in ceiling C62 in ceiling switch range. The C62 series has two sub-models including 4 ports and 8 ports with sufficient PoE power budget for any application and is also an IP camera controller specially designed for easy overview & management of IP cameras complying with ONVIF.

 


Specifications

Network

  • Total Gigabit Ports: 8
  • Gigabit PoE Port (10M / 100M / 1G) IEEE 802.3 10BaseT/IEEE 802.3u 100BaseTX/IEEE 803.3ab 1000BaseTX: 4 x 90W bt PoE
  • SFP Slots (100M/1G): 2
  • Gigabit RJ45 Port: 2
  • Auto MDI / MDIX: Support
  • 1Gbps Full Duplex&100Mbps Full / Half Duplex&10Mbps Full / Half Duplex: Support
  • Forwarding Capacity: 11.904Mpps
  • Mac Table: 8 k
  • Jumbo Frames: 9,216 Bytes
  • Switching Capacity: 16 Gbps

Power

  • Input Voltage: 100VAC ~ 240VAC
  • Output Voltage Range / Per PoE Port

    54 VDC

    PoE IEEE 802.3af (Max. 15.4W) output

    PoE+ IEEE802.3at (Max. 30W) output

    PoE++ IEEE802.3bt (Max. 90W) output

  • PoE Power Budget: 360W
  • Surge Protection /each PoE Port: 6KV

General

  • Dimensions (L x W x H): 320 x 207 x 44 mm
  • Weight: 3KG

Environment

  • Operating Temperature: 0°C ~ 50°C (32°F ~ 122°F)
  • Storage Temperature: -20°C ~ 70°C (-4°F ~ 158°F)
  • Operating Humidity: 10% to 90% non-condensing

Certification

  • EMC: CE,FCC,VCCI,C-Tick Class A
  • Safety: EN62368-1
  • Surge: EN61000-4-5


Reviews

Add a Review

  • Back to top
DNN