The Paradox ZX8 expander is compatible with MG Series, SP Series, E Series, and Digiplex EVO. It adds eight zones to the existing panel and has a 1PGM output.

$119  

The Paradox IP150+ is a direct replacement to the IP150 internet module. This module is a SWAN server compatible internet communication device that connects at the panel and enables the user to control and monitor a security system remotely over the internet via the Insite Gold App. The operation is identical to the IP150 with improved performance plus the addition of a safe upgrade feature and a diagnostic tool. The safe upgrade feature adds protection against a failure during an upgrade, which enables the IP150+ to revert to the previous firmware version. The diagnostic tool allows Paradox to troubleshoot any connection issues encountered in the field.

$128  

The ZX8SP is an 8-zone expansion module designed for the Magellan and Spectra series control panels. The ZX8SP connects to the control panel's combus to provide eight additional hardwired inputs and one 50mA on-board PGM output.

N.B. The ZX8SP does not support ATZ or fire zone connections.

$67  

The Paradox PRT3 Integration Module is a printer module that allows you to automatically print live and stored events. It provides an interface between an EVO control panel and third party peripheral systems as well as including a USB port for direct PC connections. The PRT3 is also able to be upgraded in the field using the CV4USB converter kit.

$197  

Compatible with E55/E65 (V2.00), MG/SP (V3.00) and EVO.
4 fully programmable 5A relay outputs.
Deactivate PGM after event and/or timer.
Pulse PGM output for fire alarms.
In-field firmware upgradeable.

$121  

The Paradox PCS260A 3G data-only (no voice) communicator enables Paradox alarm panels to send messages to a Base Station Control Room without the need for a PSTN telephone line. The PCS260 delivers communication via GSM to any Base Station that receives Contact ID or via GPRS to Paradox IP Base Station receivers.

$564  

Compatible with SP series (V2.10 or higher), MG Series (V2.10 or higher), EVO control panels and PCS200 GSM module
Record a "Site ID" to identify the installation site (Requires EVO V2.10 to program)
Dial up to 8 telephone numbers to report a burglar, panic or fire alarm using pre-recorded messages
Control PGMS and Arm/disarm the system remotely via telephone
Voice-guided menu

$119  

The Paradox CV4USB converter is a local interface between a security system control panel and the NEware/WinLoad software. Connected directly between a computer and the control panel, the CV4USB will transfer information at a speed of 19,200 or 38,400 baud to a distance of up to 300m.

$237  

433MHz two-way wireless communication.
AES-128 encryption.
LED display, show status of device and replay on/off display.
Small case design, which can be put into hiding places easily.
Automation operating, one button turn on/off from APP/Keyfob/Keypad.
Setting scenarios by different events.
With one tamper input, can be used as zone input for alarm.

$62  

433MHz two-way wireless communication
Two-way communication, stable and secure
LED display, show the differernt feedbacks with easy understanding
Up to 35 hrs battery backup after mains lost, no worry about communication
Finding and connecting up to 8 PIRCAM or smoke detectors automatically, smart auto-pairing
Easy installation with new designed structure

$184